Similar Jobs

• Intermediate Electrical Engineer

  Hertfordshire - St Albans

  to £48,000 per annum + benefits

  Permanent

  The Company: The Company was founded in 1983 in South Africa. The company is very strong in leisure, education, commercial, retail and residential sectors of the market. The Company employs circa 20 employees, and although a relatively small Company punches well above its weight in terms of projects undertaken. Project values have varied from £4million to £200million in terms of construction value. They have won national and international awards for some of its projects and has established itself as a leader in low carbon and renewable technologies and low energy buildings. The type of work is varied; for instance they have written the technical guidance for Sport England wet and dry sports centres and partnered with a number of local authorities and main contractors. The design work varies from developing concept designs to Stage 3 for planning purposes to fully detailed design, contract and construction drawings. The candidate will report directly to the Director. The candidate joins the company in the midst of exciting times, with a strong order book and growth opportunities. The candidate will be given the opportunity to develop their knowledge and skills and ultimately manage their own projects, which will include managing a team of engineers, building physicist and technicians. Qualifications and experience:

  • British citizen or in possession of the right to work in the UK
  • Degree qualified in electrical engineering
  • From 2 years’ experience to senior engineer working as electrical (building services) design engineer (preferably in in the UK)
  • Good design skills
  • Preferential but not essential experience:
    • Working knowledge of wiring regulations BS 7671
    • Working knowledge of relevant British Standards
    • Experience in Education, leisure, residential, and mixed use sectors
    • Familiarity with BREEAM, and implications for M&E design
    • Revit MEP

  Job Description: The engineer will be required to deal with projects predominantly in the South-East from concept/feasibility stage, through design and construction to commissioning and handover under the guidance of a director. Skills that will be developed include but are not limited to the following:

  • Lighting calculations
  • Cable calculations
  • Part L Compliance checking
  • Detail development of concept designs to include equipment selection and specification etc
  • Design and specification of renewable technologies
  • Liaison with utility companies for new and diversion of existing services
  • Liaison with architects, clients, structural engineers and contractors
  • Project Management
  • Site inspections

  Benefits:

  • Private medical aid for the individual and immediate family
  • Company pension fund with Aviva (5% employee / 3% employer)
  • Travel costs for business covered
  • Annual leave 25 days / annum (30 days after 5 years service)
  • WFH up to 2 days per week, to be agreed with line manager
  • Hours of work 08h30 to 17h00 with 1 hour for lunch
  • Mobile Phone allowance

  Apply now

• Senior Mechanical Engineer

  London - London Bridge, SE1

  to £60,000 per annum + benefits

  Permanent

  Client: Mechanical & Electrical Building Services consulting practice founded in 1988.   Operating in the healthcare, education, commercial and residential care sectors they adopt a design philosophy based on low energy consumption and long term building sustainability. Role:

  • Undertake mechanical design work consisting of surveys, design, drawings and specifications for projects. Work in conjunction with other Client design team members as required as part of an overall project team. Ensure the design and maintenance of building systems meets legislative and health and safety requirements Specify products, equipment and installation standards relating to mechanical services suitable for the costing and installation by Contractors.
  • Take the lead role for the company, where necessary, on projects.
  • Prepare budget costs for schemes and maintain these during the design stage of a project. Issue a pre-tender estimate to the QS (if part of the project remit). Obtain assistance from Associate Engineers where required.
  • Comment on mechanical services valuations during the construction process.
  • Attend project design meetings, technical meetings, Value Engineering Workshops, Risk Workshops etc as required by the project.
  • Attend site as part of the construction phase activities of projects and participate in site meetings. Undertake snagging, preparation of snagging lists, valuations (if required) and end of defects inspections as required. When undertaking valuations where we are acting as Lead Consultant these are normally undertaken on a monthly basis and include the preparation of Certificates and Valuation paperwork for submission to the Client to allow payment authorisation.
  • Undertake surveys and reports for the company including Feasibility studies, and Condition Surveys and generate reports meeting the company report format.
  • Undertake presentations for projects relating to mechanical services.
  • Advise Clients and other designers on energy use and conservation in a range of buildings and sites, aiming to minimise the environmental impact and reduce the carbon footprint.
  • Utilise Cymap Building Services software for steady state calculations.
  • Utilise TAS software/engage with an external modelling company for thermal modelling in conjunction with other members of staff where required for projects needing these calculations. Assist in developing/updating a standard set of output documents and calculations for tender issue.
  • Champion the use of BIM, Revit and TAS for mechanical and electrical services design work in the office.
  • Undertake tender reviews and provide recommendation reports for the appointment of Contractors. This shall be either in conjunction with other Design Team members where required.
  • Work in conjunction with other staff members on design work as part of an overall project team. In particular work with the junior members of staff to support the project and to assist in their development.
  • Participate in the Staff Review process which is undertaken on an annual basis.
  • Complete the company timesheets system on a weekly basis to record time worked on specific project tasks.
  • Undertake CPD training to continue your education and training.
  • Participate in the health and review process within the company and adhere to the Health and Safety procedures in place.
  • Develop Client relationships with the aim to obtain repeat business for the company.

  Apply now

• Principal Electrical Engineer

  London - Battersea, SW11

  to £75,000 per annum + benefits

  Permanent

  Role: This is an exciting opportunity for a Building Services Principal Electrical Engineer with a leading International multi-disciplinary design consultancy in Central London.  They are one of the UKs Top Employers for 5 years in a row according to Top Employer Institute.  Their multi-disciplined team includes MEP (30 strong), Environmental Design & Sustainability, VT, and Architectural Design Lighting.  They are involved in high profile and prestigious projects all over the world across a variety of sectors so the role may involve some travel. Responsibilities:

  • Full time role reporting to the team leader / partner.
  • Undertake and deliver high quality detailed engineering design for electrical building services and power distribution systems, including calculations, analysis, schematics, drawings, diagrams, models, specifications, and other documents required.
  • Apply relevant legislation, standards, regulations, guides and good practise for UK and International projects.
  • Take responsibility for specific areas of the design and project development. Lead electrical engineering design for small and medium sized projects.
  • Seek, complete and record evidence of, continuing professional development (CPD) in accordance with the requirements of the relevant professional Institution.
  • Represent the company in professional and diligent manner at all times, attend meetings with client, project team, contractors etc.
  • Communicate design concepts and detailed solutions to a varied audience including engineers, architects, contractors and client representatives both in report form and verbally in presentations.
  • Manage multiple projects, delegate work and supervise junior engineers in the team.
  • Act as a mentor for the practice Graduate Training Scheme.

  Skills: Essential:

  • Electrical engineering, Building Services/Engineering related degree or related experience with electrical bias.
  • Fluent English (Spoken and Written).
  • Qualified as a Chartered Engineer or in final stage of registering (or validated Overseas equivalent).
  • Solid technical understanding of own core engineering discipline and the role of the electrical engineer within the design team.
  • Broad understanding of other engineering disciplines engaged in the design of the built environment.
  • Good understanding of UK Building Regulations and industry standard design reference material.
  • Ability to use initiative in response to demands of project.
  • Able to present, negotiate and communicate well in graphical, written or verbal forms including ability to listen and to understand others.
  • Ability to understand and formulate design decisions.
  • A flexible and open attitude towards new ways of working and a proven commitment to independent, lifelong learning.
  • Self-organized and motivated.
  • Developed problem-solving and analytical skills.
  • Good interpersonal skills and able to work independently and as part of an effective team
  • Able to build good relationships at all levels, internally and externally.
  • Resilient to cope with conflicting demands, able to prioritise duties and work effectively under pressure.
  • Ability to use general and engineering and construction specific software for design and analysis including BIM, electrical engineering, lighting design eg. Autodesk Revit, Trimble ProDesign, Dialux.

  Desirable:

  • International project experience.
  • Familiar with LEED, WELL environmental assessment methods.
  • Second language.

  Apply now