Similar Jobs

• Graduate Electrical Engineer

  London - Battersea, SW11

  £30,000 per annum + benefits

  Permanent

  Role: This is an opportunity for a Graduate Electrical Engineer with a leading International multi-disciplinary design consultancy in Central London.  They are one of the UKs Top Employers for 5 years in a row according to Top Employer Institute.  Their multi-disciplined team includes MEP (30 strong), Environmental Design & Sustainability, VT, and Architectural Design Lighting.  They are involved in high profile and prestigious projects all over the world across a variety of sectors so the role may involve some travel. Responsibilities:

  • To understand the design project.
  • To prepare, and develop under the guidance of a project leader, calculations, analysis, drawings, diagrams, models and other documents relating to the design.
  • To assist where required in the co-ordination of the internal design team.
  • To take responsibility, where required by the project leader, for specific areas of the design and project development.
  • To liaise, where appropriate, with members of the external design team and other associated organisations or companies.
  • To seek, and record evidence of, continuing professional development (CPD) in accordance with the requirements of the relevant professional Institution.
  • To contribute, or otherwise assist, as required by the Project Leader or Senior Partner, or nominated Engineer.
  • To take responsibility in project document control and filing as required by the project leader.
  • Equity, diversity & inclusion (EDI) is a core priority. To support and champion the embedding of this focus as a collective workforce responsibility, EDI should be integrated, where relevant, into all workstreams.
  • Thorough knowledge of and compliance with procedures and standards.

  Qualities and Skills: Essential:

  • Able to demonstrate ability to undertake the above responsibilities.
  • Legally able to work in the country in which the position is based.
  • Technical engineering skills with the relevant university qualifications.
  • Ability to understand and formulate design decisions and present for discussion.
  • Ability to use a variety of media in the development and documentation of a design project
  • Advanced knowledge of working with Microsoft Office software to be used for calculations, reports and presentations.
  • Working knowledge of core technical guidance of the IET Wiring Regulations; BS 7671 and CIBSE supporting documents relevant to the position.
  • Excellent organisational skills.
  • Excellent written and verbal communication skills – articulate and diplomatic manner.
  • Able to manage sensitive and sometimes confidential information.
  • Self motivated and able to take responsibility.
  • Able to demonstrate initiative and a proactive approach to daily tasks.
  • Good interpersonal skills and able to work independently and as part of an effective team.
  • Flexible attitude.
  • Able to build good relationships at all levels, internally and externally.
  • Resilient to cope with conflicting demands, able to prioritise duties and work effectively under pressure.
  • Able to work as part of an effective team assisting and supporting team members.

  Desirable:

  • Understanding of the engineer’s role in the co-ordination and integration of project information and management.
  • Understanding of financial aspects of running a design project on time and on budget.
  • Ability to use some of the following: Autodesk Revit, AutoCAD, MicroStation, Dialux, AGI, Amtech/ Trimble Calculation Software, InDesign, Internet Explorer, Word, Excel, Outlook, PowerPoint.

    This description reflects the core activities of the role but is not intended to be all-inclusive and other duties within the group/department may be required in addition to changes in the emphasis of duties as required from time to time. There is a requirement for the post holder to recognise this and adopt a flexible approach to work. Job descriptions will be reviewed regularly and where necessary revised in accordance with organisational needs. Any major changes will be discussed with the post holder.

  Apply now

• Building Services Technician (Multiskilled and Electrical Bias)

  London - South Kensington, SW7

  £51,184 per annum + benefits

  Permanent

  The Role: Working in one of the most iconic and magical Grade 1 listed buildings in the country that stands true to its original purpose of promoting the Arts and Sciences by hosting 390 events a year in their main auditorium and 800 events in other smaller spaces. To work within the Building Services team providing M&E skills and expertise to maintain the fabric of the building and its facilities and services. Working as Duty BST whilst on roster to ensure all M&E services are functioning and to provide any building facility services for the successful staging of more than 100 events . To undertake day-to-day monitoring, maintenance and small mechanical works projects to a high level quality of craftsmanship, and work throughout the building with a flexible and adaptable approach to support the staging of events.  Key Responsibilities:

  • To maintain the mechanical plant services and electrical services ensuring that they are in a safe working condition, comply with safety regulations and are fit for use.
  • To ensure that all domestic services (including the use of equipment and systems with water, electrics and gas) are maintained in a good working order and that repairs or improvements are undertaken to ensure uninterrupted service.
  • To maintain all electrical installations, services and plant in a safe efficient manner, in accordance with current electrical regulations.
  • To ensure all life safety installations are maintained and kept in a good working order, i.e. PA system, fire alarm, secondary lighting; and to carry out first line response / repairs to these systems.
  • To be fully conversant with the 17th Edition IEE Wiring Regulations and on site guide.
  • To be competent and conversant with all types of modern electrical installation systems, have an ability to carry out fault diagnosis, and have a good working knowledge of electrical equipment to undertake repairs.
  • To undertake occasional Portable Appliance Testing.
  • To maintain the heating, ventilation and air conditioning plant and systems ensuring that all air handling units, chillers, fan coil units are kept in good working order.
  • To carry out any pipe work installations and repairs as requested ensuring that all work complies with current regulations.
  • To carry out daily plant room checks, to monitor and check the Building Maintenance System (BMS) – Trend 963 and ensure that any malfunction or issues of concern are noted and acted upon, and reporting to senior colleagues as required.
  • To attend to plumbing requirements including the unblocking of toilets and any remedial work that is required.
  • To carry out basic maintenance check on the stage lift working with your BST colleagues and liaising with external lift contractors when required.
  • To attend site in an emergency as requested by the management team to assist with the building facility or services.
  • To ensure the workshop, workbenches and stores for equipment are kept in a clean and tidy manner, that all equipment is properly put away, without blocking any access areas and that stock levels are maintained at an appropriate level, informing the M and E Services Manager of any stock or equipment parts requirements for ordering. Place orders on the purchase order system for all approved purchases.
  • To undertake the PPM on all mechanical, domestic, and heating systems are requested.
  • Embrace the Sustainability Policy and work to meet its objectives, putting sustainability at the forefront of all decisions.
  • Develop a good understanding of the Hall’s Health and Safety guidelines and your responsibilities within these. Promote a safe working environment and foster the non-blame culture, adhering to any Health & Safety requirements, flagging any conflicts that may arise with Health and Safety and working towards finding effective solutions.
  • To undertake any other duties as reasonably requested by the Management including the Building Services Manager, Deputy Building Services Manager, Facilities Manager and Director of Operations.

  Person Specification:

  • Have undertaken an apprenticeship with completion of City and Guilds or other relevant courses (e.g. 236 part 1 and 2, electricity at work regulations, 17th edition - wiring regulations, 2391- electrical test/inspection) or at least level 2 NVQ, with a good all round knowledge and experience of working with electrical and mechanical building systems.
  • Be able to undertake installation, testing and inspection of M&E services, systems and equipment with an ability to work on pumps and motors, inverters, plumbing and HVAC systems, gas fired burners, low temperature hot water systems and if possible steam boilers.
  • Have considerable experience in a complex and large public entertainment venue, responding to a helpdesk system and BMS-generated alarms.
  • Hold a CSCS Certificate
  • Be capable of fault finding, testing and inspecting electrical circuits and equipment, identifying solutions and where possible working to rectify systems to a safe working condition, which is often to tight deadlines particularly just prior to the commencement of a show.
  • Be computer literate to include a reasonable knowledge of Word, Excel and Outlook. Building Services Technicians are required to complete a duty log report for show duty shifts.
  • Have an understanding of energy management and environmental control measures and be able to offer creative solutions for improvement of building services systems.
  • Have a flexible adaptable approach, ability to work constructively within a team with good communication skills, to be clear and concise and capable of remaining calm during potentially stressful situations.
  • Have a ‘hands on and can do’ approach to work.
  • Undertake their work with due diligence and with a thorough understanding of health and safety processes, particularly in relation to restricted access and high hazard areas, as well as the need for permits to work for certain Building Services activities.

  Apply now

• Associate Director

  Surrey London - Croydon

  to £95,000 per annum + benefits

  Permanent

  Our client is a well-established and growing Building Services Consultancy with a strong reputation for delivering high-quality engineering solutions across a diverse portfolio of projects throughout the UK. As part of its continued growth, they are seeking an experienced Associate Director to join their leadership team and play a key role in the management, development and future success of the business. This is an outstanding opportunity for an ambitious senior professional looking to step into a strategic leadership position with responsibility for people, projects, clients and business performance. Role: Reporting into the senior management team, you will provide leadership and operational support across a multidisciplinary Building Services team while acting as a key point of contact for clients and stakeholders. You will be responsible for the successful delivery of projects and frameworks, ensuring technical excellence, commercial performance and outstanding client service. Alongside project leadership, you will contribute to resource planning, team development, business growth and the strategic direction of the business. This role offers significant autonomy and influence, making it an excellent opportunity for an experienced Associate, Associate Director or Principal-level professional looking to take the next step in their career. Responsibilities:

  • Lead and support multidisciplinary engineering teams to deliver high-quality project outcomes.
  • Act as a senior client contact and develop long-term client relationships.
  • Oversee the delivery of multiple projects, frameworks and workstreams.
  • Provide technical leadership and undertake quality reviews of engineering outputs.
  • Support office operations, resource planning and workload allocation.
  • Mentor, coach and develop engineers at all levels.
  • Conduct performance reviews and support professional development initiatives.
  • Prepare fee proposals and contribute to bid and tender submissions.
  • Monitor project performance, budgets and profitability.
  • Support invoicing, forecasting and commercial management activities.
  • Participate in management meetings and strategic business planning.
  • Identify opportunities for business growth, repeat business and new client development.
  • Promote a collaborative, inclusive and high-performing team culture.

  Requirements:

  • A strong background within a Building Services Consultancy environment.
  • Proven experience leading teams, projects and client relationships.
  • Excellent commercial awareness and project management capability.
  • Track record of business development and winning new work.
  • Strong leadership, mentoring and people management skills.
  • Experience managing multiple projects and competing priorities.
  • Exceptional communication and stakeholder management abilities.
  • A collaborative approach with a genuine passion for developing teams and growing client relationships.

  Apply now